Dear users, in order to ensure that the product you are buying as economically as possible and practical, the choice of Coors products, be sure to confirm the following with our sales engineer:
1, studio size (generally the volume of the test sample does not exceed Studio 1/5 of the overall volume of the best results, the most authentic).
2, temperature range, with or without changes in temperature program or rapid temperature change of the requirements, if any, given the speed of change of the reference temperature.
Humidity range, whether the low temperature and humidity requirements, whether the humidity program change requirements, if any, given the corresponding diagram.
4, with or without a load, the load is fever, if the fever given reference power.
The refrigerator cooling method selection, should be read in conjunction with the actual situation of the laboratory and the local. If the choice of the small test chamber refrigeration system, can give priority to air-cooled; optional refrigeration system larger chamber, under the conditions allowed, the priority to choose the water-cooled.
Dimensions whether the requirements, and out of the laboratory and product placement, working conditions, maintenance conditions, in order to avoid unnecessary trouble.
7, on a test stand with or without carrying requirements, and if so, the weight of a given reference.
8, the power condition and installation of power, whether they have, and whether there is sufficient margin.
9, with or without the optional functions, the choice of accessories, spare parts requirements (the unit series standard products in the standard configuration can work properly, meet general test requirement).
10, because space is limited, to perform or meet the standards are generally refers to the actual application is part of the standard or part of standard part of the terms listed in the sample. User ordering, as much as possible to indicate the specific implementation of the standard terms and conditions, given the detailed temperature and humidity points or other special indicators.
11, and other relevant parameters and issues.
12 user selection, as far as possible choose standard models, in order to obtain as soon as possible, the delivery and quality assurance of the most economical. However, due to the diversity of the testing requirements, we have the ability and are willing to undertake the manufacture of a variety of non-standard products or OEM products.
