See Larger Image
Button Pull machine use:
The purpose of this test is to define the garment manufacturer's responsibility to ensure buttons, buttons and fasteners can be properly secured in the garment, to prevent the buttons from the clothing, causing the baby a chance to swallow hazard. Therefore, all the buttons on clothing, buttons and fasteners required strength tester via buttons detection. Mainly used for testing all types of textiles buttons on the suture strength. The specimen is mounted on the base, were gripped with buttons, lift the fixture off button, pull the table to read from the desired tension values. The main instrument for the cast iron structure with handles can be adjusted up and down tension table runner position aluminum clamp can be securely fixed to the test sample
Button Rally Standard:
16 CFR 1500.51-53, ASTM PS79-96
Standard configuration:
Block Rally
Imada Force Table FB 300N ﹝to order models prevail﹞
5 fixtures: Universal Mother button fixture, general public Niu fixture, long nose pliers, jaw pliers, two Claw
Dimensions: 280 * 220 * 777mm
Instructions:
1 fitted fixture, with test button, will test a model for locking the base
2 down fixture, grasp and pull the buttons, each button can withstand at least 17 pounds force (ie 7.72kg) and the need to maintain 10 seconds and no loose or broken traces, is required to test at least once every paragraph 20 Button Fang considered qualified.
3, such as where a loose or broken buttons, or replacement of necessary re-inspection.
