CRS-NFT Needle flame tester

Basic introduction:

A needle flame test is IEC60695 -11-5, and other standard GB / T5169.5-2008, GB4706.1-2005 the use of small-flame ignition source simulation project.

2, CRS-NFT needle flame tester is the required size (Φ0.9mm) needle burner, through to a specific gas (butane), the orientation angle of 45 ° timed test-fired facilities, depending on whether the ignition test and holding burning time and burn length to assess the internal condition of the equipment due to failure caused by small flame of fire risk.

3, CRS-NFT needle flame test instrument for research lighting, low voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories and other electrical and electronic equipment and parts, components production and quality control departments, but also for insulation, plastic or other solid combustible materials industry.

Technical parameters:

1, needle burner: the hole Φ 0.5mm ± 0.1mm, outer diameter ≤Φ 0.9mm, length ≥ 35mm, stainless steel

2, the burner angle: inclined 45 ° (the test) or vertically (to adjust the flame height)

3, Shi burning time: 0-999.9s ± 0.1s adjustable (usually selected for the 30s)

4, holding burning time: 0-999.9s ± 0.1s, automatic recording, manual pause

5, the flame height: 12mm ± 1mm (with height measuring instruments)

6, Shi gas Body: 95% butane gas (lighter can be used bottled gas)

7, the temperature measuring range: 0 ~ 1000 ℃

8, the flame temperature requirements: rise time of 700 ℃ ± 3 ℃ from 100 ℃ ± 2 ℃ within 23.5 seconds ± 1 seconds

9, thermocouple: Φ0.5mm import armored (K type) thermocouple

10. Test Background: Black Background

11, the testing process: test procedure automatic control, independent ventilation

12, the reference standard: IEC60695 -11-5, GB / T5169.5-2008, GB4706.1-2005

13, the studio volume: 0.5 cubic meters, stainless steel chassis (which can be customized according to customer requirements 0.75 cubic meters or cubic)

14. The apparatus outer dimensions: 1000mm wide × 650mm deep × 1300mm high